{"id":4867,"date":"2010-07-20T11:51:33","date_gmt":"2010-07-20T11:51:33","guid":{"rendered":"http:\/\/scienceblogs.com\/principles\/2010\/07\/20\/whats-a-topological-insulator\/"},"modified":"2010-07-20T11:51:33","modified_gmt":"2010-07-20T11:51:33","slug":"whats-a-topological-insulator","status":"publish","type":"post","link":"http:\/\/chadorzel.com\/principles\/2010\/07\/20\/whats-a-topological-insulator\/","title":{"rendered":"What’s a Topological Insulator?"},"content":{"rendered":"

Yesterday’s post about how nobody cares about condensed matter physics<\/a> produced a surprising number of comments of the form “I was really hoping you would post about topological insulators,” which surprised me a bit. Anyway, since people asked for it, I’ll give it a shot. The important caveats here are that 1) this isn’t my field, and 2) I have not read a great deal of the primary literature on this, so my understanding is not that deep.<\/p>\n

We’ll do this in Q&A format, as that’s been working well for ResearchBlogging posts lately.<\/p>\n

So, what’s a “topological insulator,” anyway? You make a material in the right shape, and it won’t conduct electricity?<\/strong> The name is a little confusing. It doesn’t have anything to do with the shape, and the interesting feature is not the insulating. A topological insulator is a material which will not conduct current through the bulk of the material, but will carry current along the surface. The current that it carries has some special properties, too, that arise from the quantum nature of the material.<\/p>\n

Wait, it won’t conduct in the center of the material, but does along the edges? How do you make that happen?<\/strong> The main ways to do this are illustrated in a figure from this Science<\/cite> article (paywalled, alas)<\/a>:<\/p>\n

\"i-9e5382b7d4572c8be8b3ddc2ccbdbb43-hall_effect_insulator.jpg\"<\/p>\n

The left column of this shows a simple picture of what’s going on in different types of insulating states, and that’s what you want to focus on here. The key idea is to recognize that an insulator is a material in which there are no electrons that aren’t bound to specific places inside the material. That’s the picture shown at the top (the electrons aren’t really tracing out little elliptical orbits around specific atoms, but that gets the basic idea). This happens in specific types of materials, and depends on things like the number of electrons per atom, and how those atoms are arranged in a solid.<\/p>\n

What you want to make a topological insulator is a system where the electrons in the center of the material are stuck in place, but the ones on the edges are free to move.<\/p>\n

So, wait, you want to take something that conducts, and make it only conduct on the edges? How do you do that?<\/strong> The easiest way is by applying a magnetic field, through something called the “Quantum Hall Effect,” which is represented in the second picture down in the left-hand column.<\/p>\n

<\/p>\n

The “Quantum Hall Effect,” as you might guess, is a quantum version of the ordinary Hall effect<\/a>, which occurs when you apply a magnetic field to a piece of material with electrons moving inside it. When you put an electron in a magnetic field and start it moving, it feels a force at right angles to the direction of motion and the magnetic field. This causes the electron to move in a circular path<\/a>, with the radius of the circle depending on the applied magnetic field.<\/p>\n

If the moving electrons are inside a piece of material– a semiconductor, say– this effect will divert some of the electrons from the straight-through path, and push them down toward one side. Some of those electrons will end up hitting the edge, and collect there. So, if you take a rectangular piece of semiconductor, send a current through it (running north-south, say), and put it in a magnetic field that’s perpendicular to the current (vertical), you’ll find a voltage developing sideways (east-west) across the material, and that voltage will depend on the magnetic field.<\/p>\n

That’s pertty cool.<\/strong> Yeah. It’s useful, too– that’s how we make probes for magnetic fields. If you measure the voltage, and know the properties of the material you’re using, that tells you the strength of the field.<\/p>\n

It’s not quantum, though. How do you make it quantum?<\/strong> The normal Hall effect uses a classical picture of electrons as little particles moving through the material in well-defined paths. That’s not really what happens, though– the electrons are waves, and just like the electrons in an atom can only exist in certain orbits due to their wave properties, when you look at the Hall effect in a quantum sense, the electrons can only be moving in circles whose radius satisfies the same sorts of properties as the allowed orbits in an atom.<\/p>\n

Most of the time, this doesn’t matter, because if you’re dealing with ordinary material at room temperature, there are a lot of effects that mess up the quantum behavior– the atoms in the sample are vibrating, and collide with moving electrons, knocking them off course, and there are impurities that do the same thing.<\/p>\n

If you make a high-quality sample, though, and get the whole thing to low temperature, and use a big magnetic field, you can see quantum effects in the Hall effect. Basically, the electrons can only occupy orbits of certain radii, and as you increase the magnetic field, you change the radius of the orbit the electrons want to be in, but the electrons can’t move to a new orbit until you hit the next special value of the field. This shows up as a series of flat steps in the conductance of the material as you increase the magnetic field. The conductance will take a certain value, and stay at that value as you increase the field until the next resonance, when it will make a rapid jump to a different value, and so on.<\/p>\n

OK, but what does that have to do with making an insulator?<\/strong> Well, if you look at what’s going on in the middle of the material, it looks a lot like what’s going on in the insulator. If you think in terms of electrons moving through the material, each electron is sort of stuck in place making little circular orbits. You don’t get much current flowing through the material as a result.<\/p>\n

Right, but what about the topological whatsis?<\/strong> The quantum Hall effect gives you something insulator-like in the middle of a big chunk of material, but the edges screw things up. Sticking with the individual electron picture, if you look near the edges, the electron orbits get interrupted by the surface, and the electron will tend to get bounced back into the material, reversing its velocity. Once that happens, though, it will start making another circular orbit, until it hits the edge again. the process repeats over and over, and the electron ends up following a path like the series of semicircles at the bottom of the second picture in the left-hand column.<\/p>\n

So, current can flow to the right along the bottom edge?<\/strong> Exactly. The electrons that are in the middle of the material just revolve in place, but the ones close to the bottom edge find themselves moving to the right. So you have a surface current. The same sort of picture along the top edge gives you a current flowing to the left.<\/p>\n

The net effect of this is to create a very funny sort of material, where the bulk of the material doesn’t conduct current effectively, but you have these surface states that carry current in one direction or another. More importantly, these surface currents are protected against impurities– even if you put something on the surface that should interrupt the flow of current, the current will go right by it.<\/p>\n

The what will who now? How does that work?<\/strong> Well, if you think about the way the surface states work, you can see that there’s no way for the current to be turned back. Even if you put an impurity on the surface that an electron should bounce off, reversing its direction, there’s no way for the electron to head back where it came from. The magnetic field will continue to bend the trajectories along circular arcs, and that motion has a very definite direction, either clockwise or counter-clockwise. The direction of current is completely determined by the magnetic field.<\/p>\n

In the full quantum treatment, of course, you can’t think of the electrons as following particular semi-circular paths, but the end result works out to be the same. Electrons on the top surface can only<\/em move to the left, and electrons on the bottom surface can only<\/em> move to the right, and that means that the current will flow right around any surface impurities.<\/p>\n

Hey, that’s pretty cool. So, this is a topological insulator?<\/strong> Sort of. This quantum Hall state has the properties we’re looking for, but it can only exist in the presence of a magnetic field. What we really want is a material that does this sort of thing without<\/em> a magnetic field.<\/p>\n

Yeah, but can’t you find some clever type of material that does the same thing?<\/strong> No, because of fundamental physics. We expect real physical systems to have time-reversal symmetry– that is, for everything to look the same if the flow of time was reversed. A material where electrons on the top move left and electrons on the bottom move right would violate time reversal– when you change the direction of time, the top electrons now move right, and the bottom electrons now move left.<\/p>\n

(The magnetic field provides an extra element that makes the full situation symmetric under time reversal. That is, if you reverse the direction of time and also reverse the direction of the magnetic field, everything looks the same. The magnetic field reversal makes sense if you think of how you make the field. If the field is due to current flowing in an electromagnet, when you reverse time, you automatically reverse the magnetic field, because the current is now flowing in the opposite direction.)<\/p>\n

So, it’s hopeless?<\/strong> No, because there’s another element that we haven’t accounted for in this, namely the electron spin. Electrons are not literally spinning balls of charge, but they do have intrinsic angular momentum, called “spin,” that gives you an extra factor that you can change.<\/p>\n

What you can do, then, is to construct a material where the spin is correlated with the direction of motion, shown in the third row of the figure above. Electrons with their spin up can move to the right along the bottom surface, while electrons with their spin down can move to the left. On the top surface, the directions are reversed– spin-up electron move left, and spin-down electrons move right.<\/p>\n

How does this help anything?<\/strong> It gets rid of the time-reversal symmetry problem. When you reverse the direction of time, you also flip the spin– the electron isn’t literally spinning, but behaves as if it were, and thus the spin reverses direction. So electrons that were originally spin-up and moving to the right are now spin-down and moving to the left. But that’s exactly the behavior we had for spin-down electrons originally, so everything stays the same.<\/p>\n

Yeah, but doesn’t this mean that your currents aren’t protected any more? I mean, if you put an impurity on the surface that both reflects the electron and flips its spin, then the current can be diverted after all, right?<\/strong> You might think that, but if you look closely at the situation, quantum mechanics bails you out.<\/p>\n

You can think of the spin as being represented by a little arrow pointing either up or down. In order to flip the spin from spin-up to spin-down, you can either rotate the up arrow clockwise by 180 degrees, or rotate it counter-clockwise by 180 degrees. As there’s no way to detect which of those actually happens, quantum mechanics says that they both<\/em> happen– that is, you need to include a term for each of those processes in the calculation.<\/p>\n

But when you go through the math, it turns out that the two processes cancel each other out. That is, the mathematical term for the clockwise rotation is exactly the same size as the term for the counter-clockwise rotation, only with a negative sign. So when you add the two together, they add up to zero, meaning that it’s not actually possible for an impurity to both reflect an electron and flip its spin. So, just like in the quantum Hall effect case, the electron flows right past a surface impurity, as if it wasn’t there.<\/p>\n

So, quantum mechanics is magic?<\/strong> In this limited sense, yes. For reasons that I can’t really explain, electron spins have the property that when you rotate them by 360 degrees, you get back to where you started, only with a negative sign in front of the wavefunction. That’s what leads to the difference between clockwise and counter-clockwise rotations, which leads to the cancellation of these terms, and prevents scattering by impurities.<\/p>\n

So, if you can make a material where spin-up moves left and spin-down moves right on one side, and the reverse on the other side, you can get this effect even without a magnetic field?<\/strong> Right. It turns out that, with the right choice of material, you can create exactly this sort of state. Mercury telluride (HgTe) turns out to be a material that exhibits the right properties, if you prepare it in the right way.<\/p>\n

How does that work?<\/strong>. Ummmm….. mumble, garble rhubarb spin-orbit coupling mumble narf. I don’t understand it well enough to put it in terms suitable for this blog post. The key is the interaction between the spin angular momentum of the electron and the orbital angular momentum of the electron in the atoms making up the material, which pushes the energy levels around in a way that lets you make a spin-dependent surface state. The spin-orbit effect gets stronger for heavier atoms, which is why mercury is involved, but I don’t have a good picture of how it works.<\/p>\n

The full explanation involves details of the band structure of the relevant materials, but I doubt you want to hear that.<\/p>\n

That’s ok. You kind of lost me back at time-reversal symmetry, to be honest.<\/strong> I thought that might be the case. Sorry.<\/p>\n

Anyway, the take-home message from all of this is that when you include spin in the calculation, you can make a material that has the properties of a topological insulator: it does not allow electrons to flow through the middle of a solid chunk of material, but will allow electrons to flow along the surface of the material. Moreover, the flow of electrons along the surface will be unaffected by defects and impurities on the surface (within reason, anyway– if you put enough impurities in, you effectively make it a surface of a different material, and then everything changes).<\/p>\n

What’s topological about this, again? You haven’t said anything about coffee cups and donuts yet, so I don’t see where topology comes into it.<\/strong> It’s a little difficult to explain in a picture involving real particles moving around. When you move to the more abstract “band structure” picture, it turns out that the band structure of a topological insulator has features that cannot be changed by allowable distortions of the band structure, in much the same way that you can turn a doughnut into a coffee cup with simple stretching operations, but can’t make either one into a sphere. The mathematical structure of these things is identical to some of the math you find in topology, so they’re “topological insulators.”<\/p>\n

Isn’t that an awfully confusing name?<\/strong> Look, it’s not my field. Nobody consulted me.<\/p>\n

OK, so why should people care about these things?<\/strong> Well, for one thing, the fact that we can make these sorts of materials is a little bit surprising, and deepens our understanding of the physics of materials. Since there’s an awful lot of stuff we don’t understand about the way materials work (*cough*high-T_c Superconductors*cough*), particularly where surfaces are involvedevery little bit helps.<\/p>\n

These states are also amenable to experimental exploration in a lot of ways that don’t work so well for bulk materials. You can study these states in amazing detail with scanning probe microscopes, which makes them a great test bed for exploring the implications of materials physics.<\/p>\n

Finally, they might have some practical applications. Insensitivity to surface impurities is an awfully nice feature, given how hard it is to make and maintain really clean surfaces. It also might be possible to put these sorts of materials together in ways that would be useful for quantum computation and fun things like that. There’s also some connection to things that happen in graphene, which is everybody’s favorite magic material of the future (at the moment, anyway), which bumps the interest up a little more.<\/p>\n

It’s still a young field, so the ultimate applicability of these states is not yet known, but there are a lot of ideas floating around about fun things you could maybe do with them, some of which might be useful. <\/p>\n

So, if I want to learn more about this stuff, what should I do?<\/strong> The above explanation was put together by looking at this Science<\/cite> article<\/a>, this Physics<\/cite> article<\/a>, and this piece from Nature Physics<\/cite> (warning: PDF)<\/a>, as well as listening to this lecture on YouTube<\/a>. If you don’t have the patience to listen to an hour-long physics lecture on YouTube, this Physics Today<\/cite> article co-written by the speaker<\/a> appears to be a print version of the same explanation, or at least contain the same graphics (I haven’t read it closely, as I only spotted it in my RSS feed this morning). There’s also this background article from Nature<\/cite><\/a> going through the history of the field and why it’s exciting.<\/p>\n

If you don’t have access to some or all of those, I can’t help you.<\/p>\n","protected":false},"excerpt":{"rendered":"

Yesterday’s post about how nobody cares about condensed matter physics produced a surprising number of comments of the form “I was really hoping you would post about topological insulators,” which surprised me a bit. Anyway, since people asked for it, I’ll give it a shot. The important caveats here are that 1) this isn’t my… Continue reading What’s a Topological Insulator?<\/span><\/a><\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"1","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[135,19,7,11,138],"tags":[],"class_list":["post-4867","post","type-post","status-publish","format-standard","hentry","category-condensed_matter","category-experiment","category-physics","category-science","category-theory","entry"],"_links":{"self":[{"href":"http:\/\/chadorzel.com\/principles\/wp-json\/wp\/v2\/posts\/4867","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/chadorzel.com\/principles\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/chadorzel.com\/principles\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/chadorzel.com\/principles\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"http:\/\/chadorzel.com\/principles\/wp-json\/wp\/v2\/comments?post=4867"}],"version-history":[{"count":0,"href":"http:\/\/chadorzel.com\/principles\/wp-json\/wp\/v2\/posts\/4867\/revisions"}],"wp:attachment":[{"href":"http:\/\/chadorzel.com\/principles\/wp-json\/wp\/v2\/media?parent=4867"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/chadorzel.com\/principles\/wp-json\/wp\/v2\/categories?post=4867"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/chadorzel.com\/principles\/wp-json\/wp\/v2\/tags?post=4867"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}